Table of Contents
Advertisement
User controls — Settings menu
11.5 Power Settings
About power settings
Configure the projector's power settings. When going on or going to sleep.
Fast Power On
Turn on this function to have the projector automatically turning on when connected to HDMI input sources.
Signal Power On
Enable this function to have the projector automatically powering on when an input source is connected.
This feature is designed specifically for HDMI 1 & HDMI 2. The HDMI sources must be connected in order to
activate this function.
Auto Power Off
Set an interval timer for the projector to automatically turn off if no signal is detected within the specified time
period.
Press the ◄ and ► buttons to increase or reduce time. The available time range is 0-180 minutes.
Sleep Timer
Set an interval timer for the projector to automatically turn off after operating for the specified amount of time.
The available time range is 0-16 hours.
Reset
Reset the power settings to factory default values.
80
R5916676 /00
G50
Advertisement
Table of Contents
