Barco G50 User Manual page 154

Communication protocols
Advanced Warp
Warp Point Movement (unit :
pixel)
Set current x&y position of a
specific warp point
Get current x&y position of a
specific warp point
Warp Reset
Blend Function Enable
Blend Pattern Enable
Blend Pattern Color
Blend Overlap Size (unit : pixel)
Blend Offset Size (unit : pixel)
Blend Reset
Memory Apply Check
Memory Apply Check
Lens memory
Warping memory
User data memory [UDCC?]
154 R5916676 /00 G50
Uart
Option/Value
Command
ROW [WROW*]
Up [WPPU*]
Down [WPPD*]
Left [WPPL*]
Right [WPPR*]
[WPXY"***,***"]
[WPXY?]
[WRST1]
Enable [EBLG+BLRS1]
Disable [EBLG+BLRS0]
Enable [EBLG+OLTP1]
Disable [EBLG+OLTP0]
Green [WGCG0]
Magenta [WGCG1]
Red [WGCG2]
Cyan [WGCG3]
Up / 0~600 [EBLG+OLPU*]
Down / 0~600 [EBLG+OLPD*]
Left / 0~960 [EBLG+OLPL*]
Right / 0~960 [EBLG+OLPR*]
Up [EBLG+OSPU*] 1. (Blend overlap + blend offset)
Down [EBLG+OSPD*]
Left [EBLG+OSPL*]
Right [EBLG+OSPR*]
[EBLG+REST1]
Uart
Note
Command
[LMCP?] Bit0 return 0 is menory 1 not available; return 1 is
memory 1 available ...
[GMCC?]
Bit4: return 0 is menory 5 not available; return 1 is
memory 5 available Warping memory [GMCC?] User
[UDCC?]
data memory [UDCC?]
Note
The active warp point from the
origin move to * pixels
Signed value
Signed value
With Warp-Grid Color
1. (Blend overlap + blend offset)
<= 50% DMD native resolution
2. The value must be multiples of
4
<= 50% DMD native resolution
2. The value must be multiples of
4