Lan Function - Barco G50 User Manual

Communication protocols
C.3 LAN function
Overview
Item
Crestron 2.0
PJ-Link
AMX
Telnet
Webpage
Extron
Making a connection
To make a LAN connection with the projector, use the projector's IP address and the correct port number
depending on the used protocol. See previous table.
Example for Telnet:
1. Select: TCP/IP
2. Host: 192.168.0.100 (Projector IP)
3. Service: Telnet
4. TCP port: 3023
For other protocol Barco will only give a list of commands but is not be able to give system support.
Example for Power On/Off
1. Make connection:
Image C–2
2. Click OK to start up.
3. Enter the power on and power off command (see list of commands)
Image C–3
Crestron 1.0 command list
Item
Assign To Name
Brightness Level
Brightness Minus
Brightness Plus
Color Level
Color Minus
156 R5916676 /00 G50
Specifications
RoomView, Port: 41794
Control system
Support v2.0, without security, Port: 4352,
Device discovery only, Port: 9131
Port: 3023
English only, Port 80
Port: 2023
Type
Join Number
Serial 5051
Analog 5002
Digital 5110
Digital 5109
Analog 5001
Digital 5108