Table of Contents
Advertisement
-
Level: Adjust the light source when the brightness level of the current content gets lower than the set
value. The value ranges from 50% to 100%. The higher the value, the larger the range to adjust the
light source.
•
Extreme Black: Enable the function to automatically increase the contrast ratio by turning off the laser
light when black image is detected.
-
Light Out Timer: Set a timer for the laser light to turn off after detecting black content. The set value
ranges from 0s to 20s.
-
Light Out Signal Level: Set a black level value as the threshold for the Real Black function. The value
can be selected from 0 to 5, with 0 being the darkest black and 5 being the brightest.
•
Reset: Reset the function settings to factory default values.
User control — Image menu
R5916676 /00
G50
55
Advertisement
Table of Contents
