Table of Contents
Advertisement
3D Sync Out
Set up the transmission of the 3D sync output signal.
•
To Emitter: Send the 3D sync signal to the emitter connected to the 3D sync out port.
•
To Next Projector: Send the 3D sync signal to next projector when using multiple projectors.
3D Invert
When the 3D video does not appear correctly, use this function to invert the 3D left and right frames.
Frame delay
Set a frame delay value for the projector to correct the time difference between the 3D signal being given and
the result being executed. This function works only when L/R Reference is set to Field GPIO. When
performing 3D blending on multiple projectors, set the frame delay for each projector to correct the non-
synchronous images.
Reset
Reset the function settings to factory default values.
User controls — Installation
R5916676 /00
G50
63
Advertisement
Table of Contents
