Table of Contents
Advertisement
HDMI
This submenu helps set up the projector's HDMI ports:
•
Output: Select an I/O port to output the signal
•
EDID: When receiving an HDMI signal, the EDID option sets the projector's EDID compatibility to display
the signal correctly.
e.g. Select 1.4 for the input devices with HDMI 1.4. Alternatively, select 2.0 for HDMI 2.0 devices.
•
HDMI 1: Select the HDMI EDID type for the HDMI 1 port.
•
HDMI 2: Select the HDMI EDID type for the HDMI 2 port.
Auto Signal Resync
Select the Auto Signal Resync checkbox to enable the feature.
Once enabled, the system will automatically synchronize the projector to the recent connected input source
every time you switch the input source.
Projection Native Timing
You can change the native timing to either:
•
1920 x 1200 @ 60 Hz (default)
•
1920 x 1080 @ 60 Hz
User controls — Source menu
R5916676 /00
G50
43
Advertisement
Table of Contents
