Cpu Meter; Macro Controls - Arturia ACID V User Manual

7.2.3.3. History
Click the center "hamburger" (three lines) button to open the History window, as shown
above. This provides a step-by-step account of every move you have made in Acid V.
Clicking on an item in the list not only re-executes that move — it returns the plug-in to the
overall state it was in when you first made that move.

7.2.4. CPU Meter

At far right is the CPU Meter, which displays the overall load Acid V is placing on your
computer CPU. Since it deals only with this plug-in, it is not a substitute for the resource
metering tools in your DAW.
7.2.4.1. Panic
Mouse over the CPU Meter, and it will display the word PANIC. Click to send an all-sounds-
off command that silences any sound processed through Acid V. This is a momentary
command, so sound will resume if your DAW is still playing.
In the event of serious runaway audio (say, from an unrelated delay effect that has gone
into a feedback loop), stop your DAW playback and disable the plug-in causing the problem.

7.2.5. Macro controls

These controls can affect multiple parameters by turning just one of them, and mirror the
actions of those found in the
programmed with useful Macros.
Arturia - User Manual Acid V - USER INTERFACE
Mousing over the
CPU Meter
accesses the
PANIC function
Macros [p.80] tab of the side panel. Factory Presets are pre-
80