Reverb - Arturia ACID V User Manual

6.5.3. Reverb

Reverb is the sound of a space – a recording studio, concert hall, stairwell, tiled bathroom,
you name it. Reverb is often used as the final effect in a chain to put everything else that's
going on into the same acoustic space, lending cohesiveness to the sound.
Control Description
HPF Reduces the high-frequency content before processing
LPF Scoops out the low-frequency content before processing
Pre-delay Sets the amount of time before the input signal is affected by the reverb
Decay (V) Determines the length of time the reverb effect will last
Size (H) Adjusts the size of the room: counter-clockwise is smaller, clockwise is larger
Damping Controls the rate at which the high frequencies decay
MS Mix Adjusts the reverb from mono to an increasingly wide stereo space
Arturia - User Manual Acid V - ADVANCED VIEW PART 3 - EFFECTS 52