Table of Contents
Advertisement
1.10 Pass End
1.11 Intrude Set
1.12 Reverse Set.
1.13 Tail-Gating
1.14 Adv. Param.
.1 EN_O_SPD.1
.2 EN_C_SPD.1
.3 EX_O_SPD.1
.4 EX_C_SPD.1
.5 EN_O_SPD.2
.6 EN_C_SPD.2
.7 EX_O_SPD.2
.8 EX_C_SPD.2
.9 Save Fact.
.10 Relay Mode
.11 Auto Report
.12 NO Direction
.13 Power Lost
.14 Barriers
.15 IR Speed
.15 IR Type
.16 IR Logic
.17 Motor Pro.
.18 Self Check
.19 LED Mode
.20 Set DevType
2. System Set
2.1 Language
2.2 Device Type
2.3 Version
2.4 Set Address
Swing Barrier • User Manual
Set IR Check passage end position 1. exit (default), 1 safety
Set Intrude Alarm Mode 1.no alarm, 2 .alarm (default), 3. alarm and close
Set Passage From Reverse Alarm Mode
1 no alarm, 2. alarm, 3 alarm and close (default),
Set Tail-Gating Alarm Mode 1 no alarm, 2. alarm, 3 alarm and close
(default),
Set Motor 1 Speed when Open Door for Entry
Set Motor 2 Speed when Open Door for Entry
Set Motor 1 Speed when Close Door for Entry
Set Motor 2 Speed when Close Door for Entry
Set Motor 1 Speed when Open Door for Exit
Set Motor 2 Speed when Open Door for Exit
Set Motor 1 Speed when Close Door for Exit
Set Motor 2 Speed when Close Door for Exit
Save the current parameter to factory default
Set add relay use for passed counter
1. disable,(default),2.Enter allow, 3.Exit allow ,4. both ballow
Set automatic report gate status when on change 1 disable (default), 2
allow
Set the normally open the gate opening direction , the default enter
Set the normally open the gate opening direction when Power failure , the
default enter
signal or double machine work 1 double (default)
Set IR Sensor Sensitivity(1-100) 0-100(default 100)
Set infrared sensor type 1 PNP (default), 2 NPN
Set Use Local IR Sensor Logic
Set the motor over current protection threshold, the default 2.5A
Set use self check when power on, disabled by default
Set LED indicator default parameter 1 Static LED,2 Square LED
Set Controller Device Type 1 Tripod 2 Flap gate, 3 Swing gate
Set Menu Display Language
Display Controller Device Type
Display hardware and firmware version information
Set Device Logic Address
17
, 2 signal
Advertisement
Table of Contents
