Table of Contents
Advertisement
5) Move turnstile and drill hole by impact drill, fix Expansion screws
6) Tighten the expansion screw after the functional test is completed
7)Confirm the lane lines, dig line pipe diameter into the appropriate PVC line pipe, each lane
will AC220V power line RVV3*1.5mm and 3pcs CAT 5 cable for connect main machine , 1 PCS
network cable for access control system (if install other control system according to the actual
situation of laying related field the wire)
8) Move each machine to the corresponding mounting position and point to the expansion
bolt position；
9) Check again;
10)Check each gate alignment, all lane are completed debugging and function test, then tighten
the nut.
2.3 Connection
1) Connecting AC220V power input
Connect the mater machie power adapter to 220V and connect the protective ground wire.
Swing Barrier • User Manual
\
11
Advertisement
Table of Contents
