Using The Cli - TP-Link T1600G Series Configuration Manual

Managing System
The Template Table displays the resources allocation of each template.
SDM Template
IP ACL Rules
MAC ACL Rules
COMBINED ACL
Rules
IPv6 ACL Rules
ARP Detection
Entries
IPv6 Source
Guard Entries
6.2

Using the CLI

Follow these steps to configure the SDM template function:
Step 1 configure
Enter global configuration mode.
Step 2 show sdm prefer { used | default | enterpriseV4 | enterpriseV6 }
View the template table to select the desired template.
used: Displays the resource allocation of the current template.
default: Displays the resource allocation of the default template.
enterpriseV4: Displays the resource allocation of the enterpriseV4 template.
enterpriseV6: Displays the resource allocation of the enterpriseV6 template.
Step 3 sdm prefer { default | enterpriseV4 | enterpriseV6 }
Select the template that will be effective after the next reboot.
default: Select the template of default. It gives banlance to the IP ACLrules, MAC ACL rules and
ARP detection entries.
enterpriseV4: Select the template of enterpriseV4. It maximizes system resources for IP ACL
rules and MAC ACL rules.
enterpriseV6: Select the template of enterpriseV4. It allocates resources to IPv6 ACL rules.
Step 4 end
Return to privileged EXEC mode.
Displays the name of the templates.
Displays the number of IP ACL Rules including Lay3 ACL Rules and Lay4 ACL Rules.
Displays the number of Lay2 ACL Rules.
Displays the number of combined ACL rules.
Displays the number of IPv6 ACL rules.
Displays the number of TCAM entries for ARP defend.
Displays the number of IPv6 source guard entries.
SDM Template Configuration
Configuration Guide 71