Table of Contents
Advertisement
Managing System
Time Interval
Time (HH:MM)/
Date (DD/MM/
YY)
Save Before
Reboot
4.1.7 Reseting the Switch
Choose the menu System > System Tools > System Reset to load the following page.
Figure 4-7 Reseting the Switch
In the System Reset section, select the desired unit and click Reset.
Target Unit
Note:
After the system is reset, configurations of the switch will be reset to the default.
4.2 Using the CLI
4.2.1 Configuring the Boot File
Follow these steps to configure the boot file:
Step 1
configure
Enter global configuration mode.
Specify a period of time. The switch will reboot after this period. The valid values
are from 1 to 43200 minutes. This reboot schedule recurs if users check the Save
Before Reboot.
Specify the date and time for the switch to reboot.
Time (HH:MM): Specify the time for the switch to reboot, in the format of HH:MM
Date (DD/MM/YY): Specify the date for the switch to reboot, in the format of DD/
MM/YYYY. The date should be within 30 days.
Select to save the switch's configurations before it reboots.
Select the desired unit to reset. By default, it is ALL Unit.
System Tools Configurations
Configuration Guide
49
Hide quick links:
Advertisement
Table of Contents
