TP-Link T1600G Series Configuration Manual page 258

Configuring Spanning Tree
Switch(config-if)#spanning-tree hold-count 8
Switch(config-if)#spanning-tree max-hops 25
Switch(config-if)#show spanning-tree bridge
State Mode
------- ------- -------- --------
Enable Mstp
Switch(config-if)#end
Switch#copy running-config startup-config
3.2.4 Enabling Spanning Tree Globally
Follow these steps to configure the spanning tree mode as MSTP and enable spanning tree
function globally:
Step 1 configure
Enter global configuration mode.
Step 2 spanning-tree mode mstp
Configure the spanning tree mode as MSTP.
mstp:
Step 3 spanning-tree
Enable spanning tree function globally.
Step 4 show spanning-tree active
(Optional) View the active information of MSTP.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
This example shows how to configure the spanning tree mode as MSTP and enable
spanning tree function globally :
Switch#configure
Switch(config)#spanning-tree mode mstp
Switch(config)#spanning-tree
Switch(config)#show spanning-tree active
Spanning tree is enabled
Priority Hello-Time
36864 2
Specify the spanning tree mode as MSTP.
Fwd-Time Max-Age
-------- --------
12 20
MSTP Configurations
Hold-Count Max-Hops
--------- --------
8 25
Configuration Guide 235