Table of Contents
Advertisement
2.1
Unpacking
After receiving your USB-4751/4751L package, please inspect its contents first. The
package should contain the following items:
USB-4751/4751L Module
Shielded USB 2.0 Cable (1.72 m)
User Manual
The USB-4751/4751L Module harbors certain electronic components vulnerable to
electrostatic discharge (ESD). ESD could easily damage the integrated circuits and
certain components if preventive measures are not carefully paid attention to. Before
removing the module from the anti-static plastic bag, you should take following pre-
cautions to ward off possible ESD damage:
Touch the metal part of your computer chassis with your hand to discharge static
electricity accumulated on your body. One can also use a grounding strap.
Make contact between the anti-static bag and ground before opening.
After taking out the module, you should first:
Inspect the module for any possible signs of external damage (loose or damaged
components, etc.). If the module is visibly damaged, please notify our service depart-
ment or our local sales representative immediately. Avoid using a damaged module
with your system.
Avoid physical contact with materials that could hold static electricity such as
plastic, vinyl and Styrofoam.
2.2
Driver Installation
The driver package could be found on Advantech Support Portal (https://www.advan-
tech.com/support). Search for USB-4751/4751L on the support portal, then the corre-
sponded driver/SDK package could be found. You'll get the XNavi installer after the
download session finishes.
Execute the installer, then it will guide you through the session. You can choose the
device and software components you'd like to install in the system (Figure 2.1). After
the selection, click on "start" to begin the installation.
USB-4751/4751L User Manual
Figure 2.1 XNavi Installer
4
Advertisement
Table of Contents
