Table of Contents
Advertisement
Quick Links
Keithley Instruments
28775 Aurora Road
Cleveland, Ohio 44139
1-800-833-9200
tek.com/keithley
Supplied accessories
The following table lists the parts that are supplied with the 2651A-PCT-KIT.
Part number
Description
2651A-KIT-2
2 m (6.6 ft) low-impedance, high-current coaxial cable assembly
174694600
RJ45 crossover cable
2 m (6.6 ft) 8-pin plug-to-plug screw terminal cable
CA-557-2A
CA-558-2B
2 m (6.6 ft) safety interlock cable
CA-568-120A
3 m (10 ft) green and yellow safety ground cable
PA-1033x
Model 2651A safety supplement (not shown)
0713411xx
Safety precautions (not shown)
PA-937x
Environmental disclosure report (not shown)
4299-6
Full-Rack Single-Unit Rack Mount Kit (not shown)
071326802 August 2022
Figure 1: Model 2651A-PCT supplied accessories
*P071326802*
Model 2651A-PCT-KIT
Accessory Kit
Quantity
1
1
1
1
1
1
1
1
1
1
Advertisement
Table of Contents
Related Manuals for Tektronix Keithley 2651A-PCT-KIT
Summary of Contents for Tektronix Keithley 2651A-PCT-KIT
- Page 1 Model 2651A-PCT-KIT Keithley Instruments Accessory Kit 28775 Aurora Road Cleveland, Ohio 44139 1-800-833-9200 tek.com/keithley Supplied accessories Figure 1: Model 2651A-PCT supplied accessories The following table lists the parts that are supplied with the 2651A-PCT-KIT. Part number Description Quantity 2651A-KIT-2 2 m (6.6 ft) low-impedance, high-current coaxial cable assembly 174694600 RJ45 crossover cable 2 m (6.6 ft) 8-pin plug-to-plug screw terminal cable...
- Page 2 Safety precautions The following safety precautions should be observed before using this product and any associated instrumentation. Although some instruments and accessories would normally be used with nonhazardous voltages, there are situations where hazardous conditions may be present. This product is intended for use by personnel who recognize shock hazards and are familiar with the safety precautions required to avoid possible injury.
- Page 3 For safety, instruments and accessories must be used in accordance with the operating instructions. If the instruments or accessories are used in a manner not specified in the operating instructions, the protection provided by the equipment may be impaired. Do not exceed the maximum signal levels of the instruments and accessories. Maximum signal levels are defined in the specifications and operating information and shown on the instrument panels, test fixture panels, and switching cards.
Need help?
Do you have a question about the Keithley 2651A-PCT-KIT and is the answer not in the manual?
Questions and answers