Front Panel And Connector Pinouts - National Instruments NI 5762 User Manual And Specifications

Front Panel and Connector Pinouts

Table 2 shows the front panel connectors and signal descriptions for both versions of the NI 5762. Refer
to the Specifications
Caution To avoid permanent damage to the NI 5762, disconnect all signals connected to the NI 5762
before powering down the module, and connect signals only after the adapter module has been
powered on by the NI FlexRIO FPGA module.
Device Front Panel
NATIONAL
INSTRUMENTS
NI 5762
AI 0
TRIG
CLK IN
AI 1
AUX
I/O
250 MS/s
Digitizer
* When not using an external Sample clock or the Reference clock, terminate the CLK IN input connector with a 50 Ω
terminator. Failing to terminate the CLK IN connector may negatively impact the jitter performance of the NI 5762.
Caution
Connections that exceed any of the maximum ratings of any connector on the NI 5762R
can damage the device and the chassis. NI is not liable for any damage resulting from such signal
connections. For the maximum input and output ratings for each signal, refer to the
section of this document.
NI 5762R User Guide and Specifications
section of this document for additional signal information.
Table 2. NI 5762 Front Panel Connectors
Connector
AI 0
TRIG
CLK IN
*
AI 1
AUX I/O
Signal Description
Single-ended analog input channel 0.
External trigger input.
Reference or external clock input.
Single-ended analog input channel 1.
Refer to Table 3 for the signal list and descriptions.
4
Specifications
ni.com