GETTING STARTED GUIDE NI 5752/5752B 50 MS/s Digitizer Adapter Module Before you begin, complete the software and hardware installation Note instructions in your FlexRIO FPGA getting started guide or controller for FlexRIO getting started guide. Using the NI 5752/5752B in a manner not described in this document Caution may impair the protection the NI 5752/5752B provides.
Furthermore, any modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules.
Table 1. FlexRIO Documentation Locations and Descriptions (Continued) Document Location Description Located at ni.com/ipnet. IPNet Contains LabVIEW FPGA functions and intellectual property to share. FlexRIO product page Located at ni.com/flexrio. Contains product information and data sheets for FlexRIO devices. Verifying the System Requirements To use the NI 5752/5752B, your system must meet certain requirements.
Unpack any other items and documentation from the kit. Store the devices in the antistatic package when they are not in use. Preparing the Environment Ensure that the environment you are using the NI 5752/5752B in meets the following specifications. 0 °C to 55 °C Operating temperature (IEC 60068-2-1, IEC 60068-2-2)
Device Front Panel Connector Description AI 0-15 Analog input channels AI 0+/AI 0- through AI 15+/AI 15- NI 5752 AI 16-31 Analog input channels AI 16+/AI 16- through AI 0-15 AI 16-31 AI 31+/AI 31- CLK IN External Sample Clock input DIO 0-15 Digital input and output terminals 16 DO...
Figure 3. Digital Input Pinout D GND D GND D GND D GND D GND D GND DO 0 DO 1 D GND D GND DO 2 DO 3 D GND D GND DO 4 DO 5 D GND D GND DO 6 DO 7 D GND...
Component-Level Intellectual Property (CLIP) The LabVIEW FPGA Module includes component-level intellectual property (CLIP) for HDL IP integration. FlexRIO devices support two types of CLIP: user-defined and socketed. User-defined CLIP allows you to insert HDL IP into an FPGA target, enabling VHDL •...
ni.com/services Visit for NI Factory Installation Services, repairs, extended warranty, and other services. ni.com/register Visit to register your NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI. A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European Communities using the manufacturer’s declaration of conformity.
Need help?
Do you have a question about the NI-5752B and is the answer not in the manual?
Questions and answers