Troubleshooting; Customer Service - Kärcher SC 2.500 C Operating Instructions Manual

Hide thumbs Also See for SC 2.500 C:
Table of Contents

Advertisement

Troubleshooting

Often, failures have simple causes and you
can do the troubleshooting yourself using
the following overview. If you are in doubt
or if the failure is not listed here please con-
tact the authorized customer service.
Danger
Always disconnect the mains plug and al-
low the steam cleaner to cool down before
performing any maintenance work.
Repair works may only be performed by the
authorized customer service.
Long heating-up time
Steam boiler is decalcified
 Descale the steam boiler.
No steam
Indicator lamp - "water shortage" blinks
red and signal sounds
No water in the water reservoir.
 Fill the water reservoir up to the "MAX"
marking.
Indicator lamp "water shortage" glows
red
No water in the steam boiler. Overheating
protection of the pump was triggered.
 Turn off the appliance.
 Fill the water reservoir
 Turn on the appliance.
Water reservoir has not been inserted prop-
erly or is calcified.
 Remove the water reservoir and rinse it.
 Insert the water reservoir and press
downwards until it arrests.
Steam lever cannot be pressed
anymore
Steam switch is secured with the lock /
child-proof lock.
 Move the selector switch for the steam
volume to the front.
High water output
Steam boiler is decalcified
 Descale the steam boiler.
All manuals and user guides at all-guides.com
Australia
KÄRCHER Pty. Ltd.
40 Koornang Road
Scoresby, Victoria 3179
1800 675 714 (Free Call)
www.karcher.com.au
New Zealand
Karcher Ltd.
12 Ron Driver Place
East Tamaki, Aukland
(09) 274-4603
www.karcher.co.nz

Customer service

English 13

Advertisement

Table of Contents
loading

Table of Contents