Step 3: Connect To Electricity Supply - Prima LPR802 Manual

08 27224 00 - Prima 60G
Step 3: Connect to the electricity
supply
Warning: This appliance must be
earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug,
having a fuse of 3 amp capacity.
If this plug does not fit the socket in
your home, it should be replaced with
a suitable plug as outlined below.
E (Earth)
GREEN / YELLOW
N (Neutral)
BLUE
Use a 3 amp fuse
in a 13 amp plug.
The wires in the mains lead are
coloured in accordance with the
following code:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
26/1/05 9:22 am Page 24
Installation Instructions
As the colours of the wires in the
mains lead for the appliance may
not correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green
2. The wire which is coloured blue
3. The wire which is coloured brown
L (Live)
The
BROWN
accessible after installation.
Should
appliance ever require replacing, we
recommend that this is carried out by
a qualified electrician who will
replace it with a lead of the same size
and temperature rating.
Important: - ensure that you route
all mains and electrical cables and
flexible tubing well clear of any
adjacent heat source.
22
and yellow must be connected to
the terminal marked E
or coloured Green.
must be connected to the terminal
marked N (Neutral), or coloured
Black.
must be connected to the terminal
marked L (Live), or coloured Red.
plug and socket
the mains lead
(Earth)
must be
of the