Table of Contents
Advertisement
If fail,nothing can be shown on EDID boxes:
In this situation ,user can check it according to the following steps:
(1) First ensure the device is power on, then MSP 221 and PC are connected, and
the USB indicator is light. If not , the USB cable need to be changed.
(2) Check if the computer operating system is Windows 7 professional version or above.
If not, change a computer with Windows 7 professional version or above.
Read EDID
HDMI WRITE1: Read EDID of HDMI WRITE1.
HDMI WRITE2: Read EDID of HDMI WRITE2.
HDMI IN: Read EDID of HDMI IN.
DVI OUT: Read EDID of HDMI OUT.
VGA WRITE1: Read EDID of VGA WRITE1.
VGA WRITE2: Read EDID of VGA WRITE2.
VGA IN: Read EDID of VGA IN.
VGA OUT: Read EDID of VGA OUT.
Note: If read successfully, the box will show EDID directly. If fail,
the box will show nothing. Also maybe there is no EDID in device.
MSP 221
User Manual
30
Advertisement
Table of Contents
