Write Edid; Edid Reset - RGBlink MSP 221 User Manual

Write EDID

Users can write EDID by MSP 221 when writing specific EDID or EDID missing. More
detail are as follows：
1. Write HDMI <WRITE1> EDID
The default EDID of HDMI <WRITE1> is RGBGDVI. Users could press HDMI <WRITE1>
and <ENTER> buttons in turn to realize the EDID writing of RGBDVI. More custom EDID
writing refers to AVMSP software (see below).
Attention:make sure the input interface of writing device has connected with the DVI
output interface of MSP 221.
2. Write HDMI <WRITE2> EDID
The default EDID of HDMI <WRITE2> is RGBHDMI. Users could press HDMI <WRITE2>
and <ENTER> buttons in turn to realize the EDID writing of RGBHDMI.
The EDID wirtting of local version can be saved in <WRITE1>. The custom EDID can be
saved in <WRITE2> through AVMSP software (see below).
3. Write VGA <WRITE1> EDID
The default EDID of VGA <WRITE1> is RGBVGA. Users could press VGA <WRITE1>
and <ENTER> buttons in turn to realize the EDID writing of RGBVGA.
More custom EDID writing refers to AVMSP software (see below).
4. Write VGA <WRITE2> EDID
The default EDID of VGA <WRITE2> is RGBVGA. The way to write VGA <WRITE2> EDID
is the same as VGA <WRITE1>. More custom EDID writing refers to AVMSP software
(see below).

EDID Reset

Users could press ENTER+WRITE2+WRITE1+COPY+HDMI+VGA+COPY+WRITE1+
WRITE2 in anticlockwise to reset EDID.
MSP 221 User Manual 26