Beko WRE 7512 XWW User Manual page 38

• Sports
You can use this programme to wash sports and outdoors garments that contain cotton/synthetics mix
and water repellent covers such as gore-tex etc. It makes sure your garments are washed gently thanks to
special rotating movements.
• Curtain
You can use this programme to wash your tulles and curtains. As their meshed texture causes excessive
foaming, put little amount of detergent into the main wash compartment. Thanks to the special spin profile of
the programme, tulles and curtains crease lesser. Do not load your curtains above the specified capacity in
order not to damage them.
C
It is recommended that you use special detergents produced specifically for curtains in this programme.
• Down Wear
Use this programme to wash your coats, vest, jackets etc. containing feathers with a „machine-washable"
label on them. Thanks to special spinning profiles, it is ensured that the water reaches the air gaps amongst
the feathers.
4.7 Special programmes
For specific applications, select any of the following programmes.
• Rinse
Use when you want to rinse or starch separately.
• Spin+Drain
You can use this function to remove the water on the garment of drain the water in the machine.
Before selecting this programme, select the desired spin speed and press Start / Pause button. First, the
machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and drain the
water coming out of them.
If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and
then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause button.
C
Use a lower spin speed for delicate laundries.
4.8 Temperature selection
Whenever a new programme is selected, the recommended temperature value for the selected programme
appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease
gradually. Temperature level lights will not turn on when the cold level is selected.
C
If the programme has not reached the heating step, you can change the temperature without switching the
machine to Pause mode.
4.9 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, „Rinse Hold" and „No Spin" options appear on the display.
When „No Spin" is selected, the rinse level indicator lights will not turn on.
C
If the programme has not reached the spinning step, you can change the speed without switching the
machine to Pause mode.
4.10 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running programme without pressing the Start / Pause
button when the machine is operating. For this, the machine must be in a step before the auxiliary function
you are going to select or cancel.
If the auxiliary function cannot be selected or canceled, light of the relevant auxiliary function will blink 3
times to warn the user.
C
If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first
will be canceled and the second auxiliary function selection will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption
table")
Auxiliary Function buttons may vary according to the model of the machine.
38 / EN
Washing Machine / User's Manual