Table of Contents
Advertisement
PosiCharge ProCore™
3.7. User-Level Troubleshooting
Fault
Message
CURRENT
CONTROL
The charging
current
cannot
be produced.
OVP FAULT
There is
a module
overvoltage.
OCP FAULT
There is
a module
overcurrent.
GATE DRIVE
UV
There is a
gated drive
undervoltage.
POWER
SUPPLY FLT
MODULE
OVER TEMP
24407-W-03 Rev-01
Operations and Maintenance Manual
Possible Cause(s)
The module failed.
The battery became
disconnected without
opening the pilot.
The module failed.
The module failed.
The module failed.
The air intake is
blocked.
The module failed.
Page 10 of 13 Webasto Charging Systems, Inc.
Solution(s)
Replace the
power module.
Wait for the fault
to clear.
Replace the
power module.
Replace the
power module.
Replace the
power module.
Remove the blockage.
Replace the
power module.
Advertisement
Table of Contents
