Section 3: Troubleshooting - Webasto TurboDX Installation Manual

STEP 11
Wrap the output cable around the enclosure. Run the charger power-up procedure
to prepare it for use.
STEP 12
POWER-UP PROCEDURE:
1. Turn on the circuit breaker.
2. Verify charging station is powered on.
3. During startup of the TurboDX EV Charging Station, the system goes through
a self-test to ensure correct operation. During this test, the indicator light will
briefly flash red to confirm the self-test is complete and the unit ready for
operation. BLUE STATUS Indicator light will stay solid indicating that charger
is receiving AC power and is ready to charge.
4. Plug the CHARGE COUPLER into your vehicle's charging outlet until it clicks.
Once latched, the CHARGE COUPLER will not disengage unless the release
button is pressed manually.
5. Charging will start automatically.
12
SECTION 3
TROUBLESHOOTING