Related Manuals for Panduit Atlona OmniStream Series
Summary of Contents for Panduit Atlona OmniStream Series
- Page 1 Certified Switches AT-OMNI-111 AT-OMNI-121 AT-OMNI-512 AT-OMNI-232 Atlona Manuals AT-OMNI-112 AT-OMNI-122 AT-OMNI-521 AT-OMNI-238 Networked AV...
- Page 2 Version Information Version Release Date Notes Aug 2017 Initial release Aug 2017 Added Luxul XMS 7048P switch Aug 2017 Added static route information Nov 2017 Added Luxul AMS 4424P switch Jun 2018 Added Pakedge S3L-24P Jul 2018 Added Cisco SG350 and SG550X switches Aug 2018 Added Luminex GigaCore 26i Sep 2018...
-
Page 3: Table Of Contents
Table of Contents Introduction Switch Requirements IGMP PoE Budget Features of Configurations Known Limitations Home Router Static Routing Default Configurations Araknis Networks AN-310-SW-F/R-8-POE Araknis Networks AN-310-SW-F/R-16-POE Araknis Networks AN-310-SW-F/R-24-POE Aruba Networks 2930F-24G-PoE+-4SFP Cisco SG300-10MPP Cisco SG300-28MP Cisco SG300-52MP Cisco SG350-10MP Cisco SG350-28MP Cisco SG350-52MP Cisco SG350X-24MP... -
Page 4: Introduction
Introduction Switch Requirements Atlona has made every effort to make sure that all switches listed in this document, meet or exceed functionality with OmniStream products, identifying them as OmniStream Certified Switches. Atlona will continue to update this document as more switches are tested. However, due to the vast number of manufacturers and switch models on the market today, it is not possible to test each one. -
Page 5: Features Of Configurations
Introduction Features of Configurations • Connect OmniStream devices plug and play. • Connect management ports to an external network, such as a home router. NOTE: Devices that are connected to either OmniStream ports (VLAN 10) or management ports (VLAN 1) on the OmniStream switch will be able to communicate with both the OmniStream units as well as the Internet (using a connected home router). -
Page 6: Home Router Static Routing
Introduction Home Router Static Routing In order for devices that are connected to the home router, to be able to connect to OmniStream devices on VLAN 10, a static route must be configured on the home router. This static route is required to send the network traffic to the proper destination. -
Page 7: Default Configurations
Default Configurations Araknis Networks AN-310-SW-F/R-8-POE Configuration File https://atlonainc.box.com/s/y81xwh9cev5m4fn94589gjvphu18bqu5 Summary Version: 1.2.00 Ports 1 through 8 can be used to connect OmniStream devices. Configuration Details Once the configuration file has been uploaded, access the switch GUI using the following IP address: VLAN1: http://10.1.1.254 •... -
Page 8: Araknis Networks An-310-Sw-F/R-16-Poe
Default Configurations Araknis Networks AN-310-SW-F/R-16-POE Configuration File https://atlonainc.app.box.com/s/s4rhypkqyjacbmqh3tczl7auxz7q8mpm Summary Version: 1.2.00 Ports 1 through 16 can be used to connect OmniStream devices. Configuration Details Once the configuration file has been uploaded, access the switch GUI using the following IP address: VLAN1: http://10.1.1.254 •... -
Page 9: Araknis Networks An-310-Sw-F/R-24-Poe
Default Configurations Araknis Networks AN-310-SW-F/R-24-POE Configuration File https://atlonainc.app.box.com/s/vrerlra60k0z868irqf2bliqn42nf6n8 Summary Version: 1.2.00 Ports 1 through 24 can be used to connect OmniStream devices. Configuration Details Once the configuration file has been uploaded, access the switch GUI using the following IP address: VLAN1: http://10.1.1.254 •... - Page 10 Default Configurations Instructions for uploading the configuration file for Araknis switches 1. Download the required configuration file. 2. Open a web browser and enter the IP address of the switch in the address bar: 192.168.20.254 3. Enter the login credentials to access the user interface. The default credentials are listed below: Username: araknis Password:...
- Page 11 Default Configurations 6. Click the From PC button to begin uploading the configuration file to the switch. From PC button 7. A Confirmation message box will be displayed. Click OK to dismiss the message box and continue with the upload procedure. 8.
-
Page 12: Aruba Networks 2930F-24G-Poe+-4Sfp
Default Configurations Aruba Networks 2930F-24G-PoE+-4SFP Configuration File https://atlonainc.box.com/s/u9e7ivw3mmd8rvz1aaffljm40bs58kre Summary Version: WC.16.05.0013 Ports 1 through 23 are to be used only for OmniStream. Ports 24 through 28 are to be used for management and can be connected to another network, such as a router that has Internet access. - Page 13 Default Configurations Instructions for uploading the configuration file for Aruba switches 1. Download the required configuration file. 2. Connect a PC to the console port of the Aruba 2930F, using a rollover cable (not provided with switch). If the PC only has USB ports, a DB9-to-USB serial adapter will be required.
- Page 14 Default Configurations 8. Open a web browser and enter the gateway IP address of 10.1.1.254. 9. Login to the switch web interface and enter the following credentials, if required: admin user: password: (leave blank) 10. Click Configuration > Management and load the Atlona provide Aruba switch configuration. 11.
- Page 15 Default Configurations 12. Click Yes when prompted to overwrite the configuration file. 13. Switch configuration is complete and will take effect immediately, without the need for a reboot. OmniStream Certified Switches...
-
Page 16: Cisco Sg300-10Mpp
Default Configurations Cisco SG300-10MPP Configuration File https://atlonainc.box.com/s/zxo0979vqcd2t4lelxe6ln82k7mvgizt Summary Version: 1.4.7.6 Ports 1 through 8 are to be used only for OmniStream. Ports 9 and 10 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 17: Cisco Sg300-28Mp
Default Configurations Cisco SG300-28MP Configuration File https://atlonainc.box.com/s/l0q7wxtnrckgr4clnl9k843ya4menolh Summary Version: 1.4.7.6 Ports 1 through 24 are to be used only for OmniStream. Ports 25 through 28 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 18: Cisco Sg300-52Mp
Default Configurations Cisco SG300-52MP Configuration File https://atlonainc.box.com/s/3ty9h2a2nl21csw2boa2tc0st9dxawao Summary Version: 1.4.7.6 Ports 1 through 48 are to be used only for OmniStream. Ports 49 through 52 are to be used for management and can be connected to another network, such as a router that has Internet access. - Page 19 Default Configurations • VLAN 1 Ports: 49 through 52 Static routing: 192.168.1.1 (home router for Internet traffic) NOTE: DHCP is not enabled on VLAN 1. It is expected that these ports would be connected to an external network with its own DHCP server, which must be using the 192.168.1.1 through 192.168.1.254 range to function properly with this configuration.
-
Page 20: Cisco Sg350-10Mp
Default Configurations Cisco SG350-10MP Configuration File https://atlonainc.app.box.com/s/rankeecnh9ey21gtrxrogkafvda2i6r8 Summary Version: 2.2.8.4 Ports 1 through 8 are to be used only for OmniStream. Ports 9 and 10 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 21: Cisco Sg350-28Mp
Default Configurations Cisco SG350-28MP Configuration File https://atlonainc.app.box.com/s/zt893yn66iflnqctwcfsx2sc2z6rvpbh Summary Version: 2.2.8.4 Ports 1 through 24 are to be used only for OmniStream. Ports 25 through 28 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 22: Cisco Sg350-52Mp
Default Configurations Cisco SG350-52MP Configuration File https://atlonainc.app.box.com/s/mr18ycd1we66q5v4m2u1i4pjms1qqvzf Summary Version: 2.2.8.4 Ports 1 through 48 are to be used only for OmniStream. Ports 49 through 52 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 23: Cisco Sg350X-24Mp
Default Configurations Cisco SG350X-24MP Configuration File https://atlonainc.box.com/s/ovcb2ozkekvcc713hyi7sn5n5lpyvagb Summary Version: 2.4.0.91 Ports 1 through 24 (Gigabit) are to be used only for OmniStream. Ports 1 through 4 (Ten Gigabit) are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 24: Cisco Sg350X-48Mp
Default Configurations Cisco SG350X-48MP Configuration File https://atlonainc.app.box.com/s/gg8zwwi76g3nc83hxsa607havyf7g8si Summary Version: 2.4.0.91 Ports 1 through 48 (Gigabit) are to be used only for OmniStream. Ports 1 through 4 (Ten Gigabit) are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 25: Cisco Sg550X-24Mp
Default Configurations Cisco SG550X-24MP Configuration File https://atlonainc.app.box.com/s/w2ux7ckmvd1ezsdk962nv49bxsk2sswu NOTE: The same configuration can be used for the Cisco SG550X-24MPP. Summary Version: 2.3.5.63 Ports 1 through 24 (Gigabit) are to be used only for OmniStream. Ports 1 through 4 (Ten Gigabit) are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 26: Cisco Sg550X-48Mp
Default Configurations Cisco SG550X-48MP Configuration File https://atlonainc.app.box.com/s/o47er6etart69hxogl95c5rlzkdnp3sx Summary Version: 2.3.5.63 Ports 1 through 48 (Gigabit) are to be used only for OmniStream. Ports 1 through 4 (Ten Gigabit) are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 27: Extreme Networks X460-G2-24P-10Ge4
Default Configurations Extreme Networks X460-G2-24P-10GE4 Configuration File https://atlonainc.box.com/s/n1jt42gu8njmhx705lt2tclb61kknfkm Summary Version: 22.6.1.4 Ports 1 through 24 are to be used only for OmniStream. Ports 25 through 32 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 28: Luminex Gigacore 26I
Default Configurations Luminex GigaCore 26i Configuration File https://atlonainc.box.com/s/gqdm9ulolk7mr4oxr6e28mc7xov9see4 Summary Version: 2.6.1 Ports 1 through 26 are to be used only for OmniStream. Configuration Details • Hostname: DemoSw • Login credentials Username: admin Password: Atlona • VLAN 1 Ports: 1 through 26 Static routing: 192.168.1.1 NOTE: The Luminex GigaCore26i switch cannot act as a DHCP server. - Page 29 Default Configurations Instructions for uploading the configuration file for the Luminex GigaCore 26i NOTE: The default IP address of the switch is 192.168.13.53 (255.255.0.0). 1. Download the Luminex GigaCore 26i configuration file from the link on page 5. 2. Open a web browser and enter the IP address of the switch in the address bar. 3.
- Page 30 Default Configurations Once the file has been uploaded, a message box will be displayed indicating that the import procedure was successful. Click the “X” in the upper-right corner of the message box to dismiss it. 6. Click the Recall button. The Recall Profile dialog box will be displayed. Click Recall all, as shown on the next page.
-
Page 31: Netgear M4300-28G-Poe
Default Configurations Netgear M4300-28G-PoE+ Configuration File https://atlonainc.box.com/s/urdd08m5ntkysh109fsjfktvotaxaj2j Summary Version: 12.0.7.15 Ports 1 through 24 can be used to connect OmniStream devices. Ports 25 through 28 are to be used for management and can be connected to another network, such as a router that has Internet access. -
Page 32: Netgear M4300-52G-Poe
Default Configurations Netgear M4300-52G-PoE+ Configuration File https://atlonainc.box.com/s/cqijouxig8tr8u2mxp7erxskng2c9bhf IMPORTANT: The GSM4352PA model provides a 480 W PoE budget with a single power supply. Depending on the number of connected PoE receivers, two power supplies may be required. Refer to the following datasheet: https://www.downloads.netgear.com/files/GDC/datasheet/en/M4300.pdf Summary Version: 12.0.7.15... - Page 33 Default Configurations Instructions for uploading the configuration file for Netgear switches 1. Connect a computer directly to the switch using the out-of-band (OOB) interface. 2. In Windows, go to the command prompt, type ncpa.cpl, and press [ENTER]. This will display the network properties for Windows.
- Page 34 Default Configurations 11. Click the Maintenance tab, at the top of the screen, then click the Upgrade tab. 12. Click HTTP File Upgrade in the menu bar on the left side of the screen. 13. Click the File Type drop-down list and select Text Configuration. OmniStream Certified Switches...
- Page 35 Default Configurations 14. Click the Browse... button and select the configuration file to be uploaded. 15. After the configuration file has been successfully uploaded, a message box will be displayed indicating that the web interface redirect to the login page. Click OK to dismiss the message box. 16.
-
Page 36: Pakedge S3L-24P
Default Configurations Pakedge S3L-24P Configuration File https://atlonainc.app.box.com/s/atpqziv3rbtf82ps7kgvoub6c66mk5p2 Summary Version: 1.0.0 Ports 1 through 23 are to be used only for OmniStream. Ports 24 through 28 are to be used for management and can be connected to another network, such as a router that has Internet access. - Page 37 Default Configurations Instructions for uploading the configuration file for the Pakedge S3L-24P 1. Download the Pakedge S3L-24P configuration file from the link on page 5. 2. Open a web browser and enter the IP address of the switch in the address bar. 3.
-
Page 38: Ruckus Icx 7150-48Zp
Default Configurations Ruckus ICX 7150-48ZP Configuration File https://atlonainc.box.com/s/cpzy20qmnfdbf8sg3gga27hgkca6ddvx Summary Version: 08.0.70d Ports 1 through 48 are to be used only for OmniStream. Configuration Details • Hostname: DemoSw • Login credentials Username: admin Password: Atlona • VLAN 1 Ports: 1 through 48 Static routing: 10.10.8.1 NOTE: Ruckus switches use two types of images: 1. - Page 39 Default Configurations Instructions for uploading the configuration file for the Ruckus ICX 7150-48ZP NOTE: By default, Ruckus switches do not have a static IP address, but can act as a DHCP client. 1. Download the Ruckus ICX 7150-48ZP configuration file from the link on page 5. 2.
- Page 40 Default Configurations 8. Configuration is complete. To access the switch, use the IP address 10.10.8.254 and login using the following credentials: username: admin password: Atlona OmniStream Certified Switches...
-
Page 41: Ubiquiti Es-24-500W / Es-24-250W
Default Configurations Ubiquiti ES-24-500W / ES-24-250W Configuration File https://atlonainc.box.com/s/xpcrqhwco946b80lqbz9dafk8u07cjmp It should be noted that the only difference between the ES-24-500W and ES-24-250W switch is the power consumption. The configuration information for both switches is identical. Refer to the next page for instructions on how to upload the configuration file to the switch. -
Page 42: Ubiquiti Es-48-500W / Es-48-750W
Default Configurations Ubiquiti ES-48-500W / ES-48-750W Configuration File https://atlonainc.box.com/s/xkzril8ihpeuf551124rc20a12yg1ksl It should be noted that the only difference between the ES-48-500W and ES-48-750W switch is the power consumption. The configuration information for both switches is identical. Refer to the next page for instructions on how to upload the configuration file to the switch. - Page 43 Default Configurations Instructions for uploading the configuration file for Ubiquiti switches 1. In Windows, go to the command prompt, type ncpa.cpl, and press [ENTER]. This will display the network properties for Windows. 2. Right-click on the adapter for the network switch and select Properties from the context menu. 3.
- Page 44 Default Configurations 11. Enter the login credentials to access the user interface. 12. Enter the IP address of the switch in a web browser, login, and click System > Utilities > Transfer. 13. In the Transfer tab, click the Upload button in the HTTP row, highlighted below. Once this button is clicked, the HTTP File Upload dialog will be displayed.
- Page 45 Default Configurations 14. Click the File Type drop-down list and select Setup Configuration. 15. Click the Choose File button to display the Open File dialog box. Select the configuration file that was downloaded in step 7. 16. Click the Open button to select the configuration file.
- Page 46 Default Configurations 21. In Windows, return to the Network Connections window, which was minimized in step 9. If the window was closed, go to the command prompt, type cpna.cpl, and press [ENTER] to restore the window. 22. Right-click on the adapter for the network switch and select Properties from the context menu. 23.
-
Page 47: Network Switch Configuration
Network Switch Configuration Before working with the OmniStream devices, the network switch must be set up. This section will provide instructions for manually configuring two different switches: Araknis AN-310-SW-24-POE and Cisco SG350X-24MP. Araknis AN-310-SW-24-POE NOTE: Although this section specifically shows images of the AN-310-SW-24-POE web interface, the following instructions are applicable to all Araknis 8/16/24-port network switches with both front and rear-facing ports. - Page 48 Network Switch Configuration Hostname 6. Enter the new administrator user name and password in the Admin Username and New Admin Password fields, respectively. When changing the password, confirm the new password in the Confirm New Admin Password field. Username and Password fields 7.
- Page 49 Network Switch Configuration 13. Click Settings > VLAN, in the menu on the left side of the screen. 14. Change the name of VLAN 1. By default, all interfaces are part of VLAN 1. Create additional VLANs as required. 15. Click Advanced > Multicast > IGMP Snooping. 16.
-
Page 50: Cisco Sg350X-24Mp
Network Switch Configuration Cisco SG350X-24MP IMPORTANT: The following is divided into five sections. Each section must be followed in the order listed below. Deviating from this order, or skipping steps within a section, may result in unpredictable switch operation. • Getting Started •... - Page 51 Network Switch Configuration 5. Click the Login button. The switch will most likely require a new password to be assigned, before going further. This step may vary depending on the network switch. Enter the desired password, as required. 6. Click the Apply button to commit changes. 7.
-
Page 52: Vlan Setup
Network Switch Configuration VLAN Setup 8. Click the Display Mode drop-down list, near the upper-right hand corner of the screen, and select Advanced. 9. Select VLAN Management from the menu on the left side of the screen. The VLAN Management menu will expand and the VLAN Settings page will be displayed. - Page 53 Network Switch Configuration 11. Enter the numerical ID of the VLAN in the VLAN ID field. This value is required and must be within the range of 2 to 4094. NOTE: VLAN 1 is the Cisco default VLAN. This VLAN can be used, but it cannot be modified or deleted.
- Page 54 Network Switch Configuration 14. Repeat steps 11 through 13 to create as many VLANs as needed. If no additional VLANs are required, click the Close button to dismiss the Add VLAN dialog box. 15. Click Administration, in the left-hand menu bar and select File Operations. The File Operations page will be displayed.
-
Page 55: Ipv4 Interface Setup
Network Switch Configuration IPv4 Interface Setup 18. Click IP Configuration in the left-hand menu bar and select IPv4 Interface. The IPv4 Interface page will be displayed. 19. Click the check box next to VLAN 1 (DHCP) and then click the Delete button. OmniStream Certified Switches... - Page 56 Network Switch Configuration 20. Check the IP settings for VLAN 1. If no changes are required, continue with Step 4. However, if a different IP address or subnet mask need to be specified, then follow the steps below: a. Click the check box next to VLAN 1. b.
- Page 57 Network Switch Configuration 21. Click the Add... button. The Add IP Interface dialog box will be displayed. 22. Click the VLAN radio button, then click the drop-down list to select the VLAN that was created under VLAN Setup (page 52). 23.
- Page 58 Network Switch Configuration 30. Click the Apply button to commit changes. OmniStream Certified Switches...
-
Page 59: Configuring Ip Multicast
Network Switch Configuration Configuring IP Multicast 31. Click Port to VLAN from the VLAN Management menu. By default, the Membership Type, for each physical port (interface), is assigned as Untagged. 32. Click the VLAN ID equals to drop-down list and select the VLAN ID that was created under VLAN Setup (page 52). - Page 60 Network Switch Configuration 34. The Membership Type, for the VLAN, will automatically be assigned as Excluded for each physical port on the switch. 35. Determine which physical ports will use the selected VLAN. Click the Membership Type drop-down list for each physical port that will use the VLAN, and set its value to Untagged.
- Page 61 Network Switch Configuration 37. Click Multicast from the menu bar on the left side of the screen. The Properties window will automatically be displayed. 38. Click the Enable box, next to Bridge Multicast Filtering Status, to enable this feature. 39. Click the IP Group Address radio button, under both Forwarding Method for IPv6 and Forwarding Method for IPv4.
- Page 62 Network Switch Configuration 43. Click the check box next to IGMP Snooping, to enable this feature. 44. Click the Apply button to commit changes. 45. Click the radio button next to VLAN 1, as shown below, in the IGMP Snooping Table. 46.
- Page 63 Network Switch Configuration 47. Click the Enable checkboxes next to IGMP Snooping Status, Immediate Leave, and IGMP Querier Status. Make sure each of these checkboxes display a checkmark. Leave the rest of the settings as they are. 48. Click the Apply button to commit changes. 49.
- Page 64 Network Switch Configuration 53. Click Unregistered Multicast from the Multicast menu on the left side of the screen. By default, all physical ports will have port forwarding enabled, as shown below. 54. Click the Filtering radio button to assign port filtering to each port. 55.
-
Page 65: Creating User Accounts
Network Switch Configuration Creating User Accounts This next section is optional, and provides instructions on creating user accounts. This is only required if multiple users will need access to the network switch. 1. Click User Accounts from the Administration menu. 2. - Page 66 Network Switch Configuration 7. Click Administration > File Operations in the menu bar on the left side of the screen. The File Operations page will be displayed. 8. Click the Duplicate radio button, next to Operation Type. 9. Click the Apply button to commit changes. 10.
-
Page 67: Appendix
Appendix Troubleshooting S3L-24P Pakedge Switch Isn’t Passing Multicast SKU: S3L-24P Challenge: The loaded Atlona default configuration file for the S3L-24P Package switch does not pass OmniStream multicast as expected. Details: The switch is not accepting the VLAN 10 IP interface using the provided configuration. The IGMP Snooping mechanism won’t work as expected without the VLAN 10 IP address. - Page 68 Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice.