R-type dual-channel networked av encoder (8 pages)
Summary of Contents for Panduit ATLONA OmniStream 111 WP
Page 1
Installation Guide AT-OMNI-111-WP Wallplate Networked AV Encoder AT-OMNI-111-WP The Atlona OmniStream™ 111 WP (AT-OMNI-111-WP) is a networked AV encoder for HDMI 2.0 sources up to 4K @ 60 Hz and HDR (High Dynamic Range). It features a US two-gang, Decora®-style wallplate form factor, and includes interchangeable black and white wallplates and faceplates.
Installation Guide AT-OMNI-111-WP Operating Notes • Atlona recommends using the Atlona Management System (AMS) which provides discovery, management, and configuration assistance. AMS is a free application that can be downloaded from the Atlona web site at http://atlona.com/product/at-sw-ams/. • This product includes a built-in web interface, which can be used to manage and configure this device.
Installation Guide AT-OMNI-111-WP Panel Descriptions TREAM TREAM HDMI IN HDMI IN HDMI HDMI LINK LINK RESET RESET RS-232 RS-232 AT-OMNI-111-WP AT-OMNI-111-WP HDMI IN RESET Connect an HDMI cable from this port to an Press and release this button to reboot the HD source.
Installation Guide AT-OMNI-111-WP Installation IMPORTANT: The venting holes, surrounding the enclosure, along with the fan assembly on the back of the unit, provides cooling by expelling warm air from the enclosure. To prevent overheating, make sure these holes and the fan assembly are not blocked.
Installation Guide AT-OMNI-111-WP LED Indicators Description • Make sure that the port on the switch, which is connected to the AT-OMNI- 111-WP, has PoE enabled. When powered, the PWR indicator will be green. • Check the Ethernet cable for possible damage or loose connections.
Page 6
Installation Guide AT-OMNI-111-WP Configuration Launch a web browser and enter the IP address of AMS, in the address bar. Enter the required login credentials. Click the Login button. The AMS Dashboard will be displayed. Click the icon, in the upper-left corner of the AMS Dashboard. Click Devices from the fly-out menu.
Page 7
Installation Guide AT-OMNI-111-WP Click the left and right arrows, at the bottom of the Unassigned list, to scroll through all available devices. Click the AT-OMNI-111-WP from the Unassigned device list. Arrows Once the unit is selected, the AMS interface for the AT-OMNI-111-WP will be displayed. Refer to the User Manual for more information on the AMS interface.
Installation Guide AT-OMNI-111-WP Troubleshooting Problem Solution PWR indicator is off. • Make sure that the port on the switch that is connected to the AT-OMNI-111-WP, has PoE enabled. When powered, the PWR indicator will be green. • Check the Ethernet cable for possible damage or loose connections.