Planing; Planing Of Narrow Workpieces; Planing With Tilted Angle Stop - HOLZMANN MASCHINEN HOB 410PRO User Manual

13.4

Planing

• Adjust the cutting depth with the set screw (A).
• Adjust the blade cover (C) to let a space of 5mm to the
workpiece.
• To start the machine push start button (I).
• Press the workpiece with one hand against the planer
table.
• Slide the workpiece with the other hand evenly over the
blade shaft.
• Push stop button to switch off the machine after work.
• Before further activities wait until blade shaft is at a
standstill!
13.4.1

Planing of narrow workpieces

• Set the blade cover (C) to a position that the blade shaft
will be covered.
• Adjust the blade cover (C) to let a space of 5mm to the
workpiece.
• Lay the workpiece with the narrow side to the planer
table and press it with one hand to the angle stop.
• Slide the workpiece with the other hand evenly over the
blade shaft.
13.4.2

Planing with tilted angle stop

• Set the blade cover to a position that the blade shaft will
be covered.
• Adjust the blade cover to let a space of 5mm to the
workpiece.
• Lay the workpiece to the planer table and press it with
one hand to the angle stop.
• Slide the workpiece with the other hand evenly over the
blade shaft.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
A
33
HOB 410PRO