Planing; Planing Of Narrow Workpieces - HOLZMANN MASCHINEN HOB 260NL User Manual

Planer thicknesser

Table of Contents

Available languages

14.5

Planing

 Adjust the cutting depth with the set screw (A)

 Adjust the blade cover (C) to let a space of 5mm to the

workpiece

 To start the machine push start button (B)

 Press the workpiece with one hand against the planer table

 Slide the workpiece with the other hand evenly over the

blade shaft

 Push stop button (D) to switch off the machine after work

 Before further activities wait until blade shaft is at a

standstill!

 For planing of narrow workpieces us the angle stop!

 Place the angle stop to the support an fix with fixing

screw (A)

 Loosen the lock lever (B) and set angle stop to 90°.

 Fix with lock lever (B) in correct position

 Set the blade cover (C) to a position that the blade shaft

will be covered

 Adjust the blade cover (C) to let a space of 5mm to the

workpiece

 Lay the workpiece with the narrow side to the planer table

and press it with one hand to the angle stop

 Slide the workpiece with the other hand evenly over the

blade shaft.

HOLZMANN MASCHINEN GmbH

www.holzmann-maschinen.at

OPERATION

HOB 260NL

Table of Contents