The STATUS light will flash in yellow. If your device isn't in configuration
mode, please turn off the device and turn it back on again.
2. Connect to Wi-Fi
Open network settings on your computer or smartphone and look for the
Wi-Fi network that starts with "Kaiterra". Connect to that network.
On the Configuration Tool, you can enter a name for the device (e.g. the
location of the device or the serial number) and a project tag. This will
provide easy identification and filtering in the configuration history page
later on to help you quickly connect the device to the Kaiterra dashboard.
Enter the Wi-Fi details to the applicable fields on the Configuration Tool,
including:
·
SSID
·
Security type
·
Password
·
IP (manual mode only)
·
Subnet mask (manual mode only)
·
Gateway (manual mode only)
Click configure device and disconnect from
the "Kaiterra" network.