Kaiterra Sensedge Mini Installation Manual page 13

D. Set up BACnet via Wi-Fi or ethernet
To set up BACnet communication, connect via Wi-Fi or Ethernet cable.
Please follow the instructions above for your preferred network
connection (Wi-Fi or Ethernet) to proceed.
1. Configure BACnet settings - prepare for configuration
Download the Kaiterra Enterprise Configuration Tool and install it on your
computer or smartphone.
After the device has been turned on, it will automatically enter the
configuration mode for 15 minutes. The STATUS light will flash in yellow. If
your device isn't in configuration mode, please turn off the device and
turn it back on again.