Kaiterra Sensedge Mini Installation Manual page 4

2. Where to place your Sensedge Mini?
·
Install in a covered area away from direct sunlight. Prolonged exposure
to direct sunlight may reduce its overall lifespan. Choose a location with
adequate shade to shield the device from the sun.
·
Install the device vertically upright with the opening facing downward to
prevent rainwater from entering the housing. Do not angle the housing,
as it may reduce its coverage ability.
·
Install your device at least 3ft (1m) above ground level to prevent water
from splashing into the device.
·
Please make sure that your desired mounting location is close to a
power source.
·
Ensure that the power supply will not be submerged in water.
·
To ensure optimal performance, keep the installation site and opening
free from debris, insects, or spider webs that may accumulate at the
bottom of the unit and obstruct the airflow.
Installation Area
Kaiterra device
3 feet
(1 m)