Advertisement
Quick Links
Advertisement
Related Manuals for Kaiterra Square Air Quality Monitor
Summary of Contents for Kaiterra Square Air Quality Monitor
- Page 1 Kaiterra Square Air Quality Monitor Wiring Guide...
-
Page 2: Required Tools
Required Tools 220V AC power cable that Kaiterra Square Air Quality Monitor Cross screw driver supports direct wiring Electrical tape or other protection measures, RS485 communication cable (optional) such as a standard electrical box... -
Page 3: Wiring Procedures
Wiring Procedures Please check if you have all the screws on the power sockets. Make sure that your power cable is disconnected from the power supply. If you’re unsure, use a probe or multimeter. Insert and fasten the live wire Power sockets (normally red or brown) and naught wire (normally blue) into the power... - Page 4 Fasten the screws. If you don’t plan to install the monitor into the wall, please use electrical tape or other protection measures to avoid electrical shocks or other injuries. Please do NOT touch the sockets or the screws when the power is connected. [Optional] Insert the RS485 communication cables into the pins and fasten the screws.
- Page 5 Step 5. Connect the power to turn on the monitor. If you want to pair the device to the internet, please see “Kaiterra Square Pairing Guide.” Snap fit*4 Screw hole*2...
- Page 6 For additional support, please contact your sales representative or contact us at the following email address: support@kaiterra.com...