Kaiterra Sensedge Mini Installation Manual page 10

1. Manual mode - prepare for configuration
If you choose to set up manual mode, please download the Kaiterra
Configuration Tool and install it on your computer or smartphone.
After the device has been turned on, it will automatically enter the
configuration mode for 15 minutes. The STATUS light will flash in yellow. If
your device isn't in configuration mode, please turn off the device and
turn it back on again.
2. Manual mode - connect to network
Open network settings on your computer or smartphone and look for the
Wi-Fi network that starts with "Kaiterra". Connect to that network.
On the Configuration Tool, you can enter a name for the device (e.g. the
location of the device or the serial number) and a project tag. This will
provide easy identification and filtering in the configuration history page
later on to help you quickly connect the device to the Kaiterra dashboard.
Enter the network details to the applicable fields on the Configuration
Tool, including:
·
IP
·
Subnet mask
·
Gateway
Click configure device and disconnect from the "Kaiterra" network.
3. Check for connectivity
The STATUS light will flash in green during the pairing process, and
eventually go off when the connection is successfully completed.