Technical Features; Preparations; Foam Rubber Installation; Electrical Preparation - Viking Range 3 Series Installation Manual

5.1 TECHNICAL FEATURES

Permissible water pressure
Electrical connection
Required Curcuit Breaker
Total power
Heater power
NOTICE :
Because we continually strive to improve our products, we may change our specifications and design without
prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.

6. PREPARATIONS

6.1 FOAM RUBBER INSTALLATION

Please open the foam insulation tape and follow the instructions in it.
This step is not imperative, but it will help you improve your soundproofing.

6.2 ELECTRICAL PREPARATION

WARNING
The dishwasher is designed for an electrical supply of 120 V, 60 Hz, AC,
connected to a dishwasher-dedicated, properly grounded electrical circuit with a
fuse or breaker rated for 15 amperes.
4.35 - 145 psi (0.3 - 10 bars)
120 V (volts), 12 A (amps), 60Hz (hertz)
15 A(amps), Dedicated
1400 W (watts)
1100 W (watts)
9
USA