Tools Which May Be Needed; Materials Which May Be Needed - Viking Range 3 Series Installation Manual

2. TOOLS WHICH MAY BE NEEDED

Pipe wrench
Hole Saw
Tape Measure
Adjustable Wrench
Level

3. MATERIALS WHICH MAY BE NEEDED

(Additional materials may be required to comply with local codes)
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided
dishwasher supply line.
3/4" FHT x 3/8" MHT connector - Elbow with 3/4" FHT(female threaded) for dishwasher
side, and sized to fit your water supply line (copper tubing/compression fitting, or
braided hose) on the other side.
UL listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing connections.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
Silicone
Glue
Dishwasher Discharge Hose Adaptor
Wire Cutter
Hammer
Torx Screwdriver
Scot Screwdriver
Brush
6
USA
Drill
Wire Stripper
Phillips Screwdriver
Scissors
Pencil