KERN PCB Operating Instructions Manual page 50



2. Start tolerance check:
 Place the weighed material and check by means of the tolerance marks / acoustic
signal if the weighed material is within the defined tolerance.
Load below specified to-
lerance
The entered values will remain valid until new values are entered.
To delete the values, select menu setting < limits >  < clear >
and confirm on ➔ button.
50
 Use the navigation keys  to select setting < limlow >.
 Press ➔ button to confirm, the numeric input window for
entering the lower limit value will appear. The active digit is
flashing.
 Enter lower limit value (numerical input see chap. 3.2.2)
and confirm the entry.
The balance returns to the < limlow> menu.
 Press repeatedly  button to exit menu.
Finished the setting works, the weighing balance will be ready
for checkweighing.
Load within specified to-
lerance
Load exceeds specified
tolerance
TPCB-A-BA-e-2314