Cadel SWEET3 7 User Manual page 30

PROBLEM CAUSE
Empty hopper
Open fire door or
open pellet door
Clogged stove
Pellets do not
reach the combu-
Auger blocked by a
stion chamber
foreign object (for
example nails)
The auger geared
motor is out of
order
Check if on the
display there is an
"ACTIVE ALARM"
Empty hopper
Auger blocked by a
foreign object (for
example nails)
The fire extinguish
Bad quality pellets Try other types of pellets.
and the stove stops
Pellet drop value
too low "phase 1"
Check if on the
display there is an
"ACTIVE ALARM"
24
SOLUTION
Full the hopper.
Close fire door and pellet door and check that there are no
pellet grains at the gasket level.
Fume chamber cleaning
Clean the auger.
Replace the geared motor.
Have the stove checked.
Full the hopper.
Clean the auger.
Adjust the pellet loading.
Have the stove checked.
INTERVENTION
Stufe a pellet