Dell E31S Series Owner's Manual page 32

Related tasks
Boot Settings details
Viewing Boot Settings
Related reference
Boot Settings
Network Settings
You can use the Network Settings screen to modify PXE device settings. The network settings option is available only in the UEFI mode.
NOTE: The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode, the optional Boot ROM
of the network controllers handles the network settings.
Related concepts
UEFI iSCSI Settings
Related tasks
Viewing Network Settings
Viewing UEFI iSCSI Settings
Related reference
Network Settings screen details
UEFI iSCSI Settings details
System BIOS
Viewing Network Settings
To view the Network Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Network Settings.
Related reference
Network Settings
Network Settings screen details
Network Settings screen details
The Network Settings screen details are explained as follows:
About this task
Option Description
PXE Device n (n = Enables or disables the device. When enabled, a UEFI boot option is created for the device.
1 to 4)
32 Pre-operating system management applications