Figure 60. Pivoting the rear cover inward
Replacing a 3.5-inch internal storage drive with a 2.5-inch internal storage drive
To replace a 3.5-inch internal storage drive with a 2.5-inch internal storage drive, do the following:
1. Ensure that the 3.5-inch internal storage drive is removed from the bracket first. See "3.5-inch internal
storage drive" on page 77.
2. Remove three pins
Figure 61. Removing three pins and installing them into new slots
3. Pivot the bracket as shown to release both tabs
1
and install them into slots
2
.
1
and
3
from the slots.
.
Chapter 7
Hardware removal and installation
83