Figure 89. Reinstalling the computer cover
4. Install the screws to secure the computer cover.
5. Place the computer in an upright position.
6. If there is any locking device available, lock the computer cover. See "Locking your computer" on page
29.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer. See
"Hardware locations" on page 1.
8. Update the configuration of your computer if necessary. See "Using the Setup Utility program" on page
35.
9. If a newly installed hardware component does not work correctly, update the device driver. See
"Keeping your computer current" on page 26.
.
Chapter 7
Hardware removal and installation
101