Table of Contents
Advertisement
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 100.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive, do the following:
1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
2. Unlock the enclosure cover with the provided key as shown. Press the notch
cover.
Figure 35. Opening the front-access storage enclosure cover
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the front-
access storage enclosure.
Figure 36. Removing the bracket from the front-access storage enclosure
4. To remove the 2.5-inch storage drive, do the following:
a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Figure 37. Removing the 2.5-inch storage drive from the bracket
b. Lift the tab
1
of the metal bracket and push the metal bracket with force as shown. Then slide the
bracket and remove it from the plastic frame.
72
P320 User Guide
a
to open the enclosure
Advertisement
Table of Contents
