When the inside of the fuel tank is dirty, it can be cleaned by rinsing the tank out with
gasoline.
TRANSPORT AND STORAGE
When the 4-in-1 multifunction machine is not used for an extended period of time (1 month),
the following measures should be taken:
-
Empty the oil and fuel tank.
-
Disassemble and clean the thread spool and cutting blade.
-
Dry the spool of wire and the cutting blade using a cloth.
-
Rub the outside of the machine using a soft, damp cloth.
Store the machine in an enclosed and well ventilated place. Keep the machine so that it is
-
not accessible to children.
Store the machine in a dry place.
-
The cutting blade, pruning machine and hedge trimmer must be properly packaged to
-
prevent cuts.
Use the baffles on cutting accessories with a metal knife.
-
TECHNICAL INFORMATION
Engine information
Type of engine
Volume of the fuel tank
Max engine speed
Engine idling speed
Clutch engagement speed
Engine displacement
Maximal power
Carburettor
Spark plug
Brushcutter
RY1E40F-5, 2-stroke engine
1200 cm³
Max.
10000
min-¹
3200±300
min-¹
4500
min-¹
42.7
cm³
1,2
kW
1E40F/HuaYi, 1E40F/JinKe, MR15A2-HY/HLIC,
MPZ15/YINBA
BOSCH L8RTF, NHSP LD L8RTF, TORCH L7RTC
30