Storage And Transport - Hyundai HYSC210 Instruction Manual

Maintenance & Care
Cleaning
CAUTION - DO NOT use a hose pipe or
!
pressure washer to clean the engine. Water
can damage the engine or contaminate the
fuel system.
!
NOTE Engine must be switched off and
plug lead disconnected.
• Wipe the machine down with a damp cloth
after every use.
• For larger build ups of debris, use a scraper
or similar product.
• Dry the machine completely to prevent rust
from forming.
• Use a light silicone spray on exposed metal
parts to protect the metal.
• Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
• Pores in the grass collector can become
filled with dirt and dust during use and will
collect less grass. To prevent this, regularly
hose the collector off with water and let to dry
before using.
30
Storage
CAUTION - When storing the machine,
!
make sure it has been cleaned as in the
section before.
NOTE - If storing the scarifier for a period of
30 days or more, you must follow proper
storage and winterisation guidelines to avoid
any possible issues with your machine.
Incorrect storage can lead to possible fueling
or engine issues that will not be covered by
the warranty.
The following steps should be taken to
prepare your scarifier for storage.
1. Drain all the fuel from the fuel tank and then
run the scarifier until it has completely run out
of fuel to clear the remaining fuel from the fuel
lines and carburetor.
2. Drain the oil from the engine.
3. Follow the cleaning instructions as set out
in the previous section.
4. Follow the maintenance section and check,
service or replace serviceable items if
required. Check the blade to make sure that
it is ready for the following season – This will
allow you to get it sharpened correctly. Use a
light oil or silicone spray to help prevent the
blade from rusting.
5. Clean the machine completely and make
sure all moving parts are lubricated with a light
silicone based spray or grease.
6. Drain and replace with new SAE 30 or
15w40 engine oil, fill to the upper mark on the
dipstick.