Advertisement
Loosen the fixing screw.
Slightly lift the end of the chain guide
Check the cutting chain for ease of operation
by turning it manually.
Adjust the tension of the chain by means of the
screw for adjusting the tension of the chain (4)
so that the chain can be lifted a few millimeters
from the center of the guide rail.
Secure the safety screw.
Installation of the harness
-
Hang the harness in its dedicated location on the tube. Adjust the size of the harness properly to
have a correct working position.
The shoulder strap is equipped with an emergency release mechanism. To detach the
machine from the shoulder strap in emergency situations, pull the rope to move away
from the machine.
WARNING
Check the emergency release mechanism BEFORE operating the machine.
Be sure to hold the machine when operating the emergency release mechanism.
When holding the machine firmly with your right hand, press both sides of the belt
buckle.
21
Advertisement
