Advertisement
-
Carter of protection (Brush cutter and grass trimmer)
-
Remove the two screws from the carter of protection.
On the tube of the brushcutter/grass trimmer, place the carter of protection on its
-
support.
Screw the carter of protection with the two screws.
-
3-theethes blade for brushcutter
-
-
On the tube of the brushcutter/grass trimmer, insert a metal locking tool into the hole
on the side of the drive gear and on the tool drive.
-
Remove cover bell and the holding nut from the shaft.
-
Install, in the following order, on the shaft: the blade, the cover bell and then the
holding nut.
-
Remove the metal locking tool.
-
To remove the metal blade, put a metal locking tool into the hole on the side of the
drive gear and on the tool drive. Unscrew the holding nut and then remove the cover
bell and the blade.
-
Cutting head for grass trimmer
-
On the tube of the brushcutter/grass trimmer, insert a metal locking tool into the hole
on the side of the drive gear and on the tool drive.
-
Remove cover bell and the holding nut from the shaft.
-
Install and screw the nylon cutting head. Make that it is well installed.
-
Remove then the metal locking tool.
-
To remove the nylon cutting head, put a metal locking tool into the tool and then
unscrew the nylon cutting head.
18
Advertisement
