Advertisement
Maintenance and storage
a) When the hedge trimmer is stopped for servicing, inspection or storage, shut off the
power source, disconnect the spark plug wire from the spark plug and make sure all
moving parts have come to a stop. Allow the hedge trimmer to cool before making any
inspections, adjustments, etc.
b) Store the hedge trimmer where the fuel vapour will not reach an open flame or spark.
Always allow the hedge trimmer to cool down before storing.
c) When transporting or storing the hedge trimmer, always fit the cutting device transport
guard.
Additional instructions
Never allow children to use the hedge trimmer.
Work only during in the day or with a sufficient artificial light.
Before starting to work, check the condition of the tool.
Ensure that all the parts of the machine are well fixed and tightened.
Control regularly that the blade of cut is in good state.
Always hold firmly the hedge trimmer with the two hands.
Never take or hold the hedge trimmer by the blade.
Maintain clothing out of reach blade as well with the stop as under operation.
Keep the device distant from all shapes of sparks, flames and flammable materials.
Control that the working areas are free from all shapes of obstacles.
Work with precaution, be not distracted.
Do not use the tool when you are under the influence of alcohol, meds or drugs, and
where you are sick.
Dry all possible gasoline traces by using a dry rag.
In case of accident, immediately stop using the machine. Check the problem. Do not use
the machine while the machine is damaged.
Operate the machine only at reasonable hours – not early in the morning or late at night
when people might be disturbed;
When blockage occurs, immediately turn off the engine with the ON/OFF button. Let the
tool cool down. Check and correct the blockage before starting again to work. Use gloves
when clearing a blockage. Restart the machine securely when the machine is totally
unblocked.
When a danger or a non-intended situation arise, stop to work immediately and switch off
the tool. Restart to work when there is no danger and you are able to work safely.
Cut before the large branches with a hand shears to avoid the blocking of the blade.
Pay attention not to cut iron wire or others.
Do not use non recommended accessories with this tool. To replace any piece of this tool,
please contact the retailer, service agent or manufacturer.
Use only the mixture recommended by the manufacturer.
Store the mixture in a specific container for the gasoline.
Keep the device in a quite dry place and out of reach of children.
Store the mixture only on free air or in a well-ventilated place. Handle the fuel with
precaution, it is highly flammable.
Do not smoke or use telephone when you handle gasoline.
Use a funnel and fill the tank only when the engine is cold.
Do not open the tank if the engine is hot or under operation.
Keep [people and yourself far away from the exhaust to avoid the risks of burns.
Maintain the people and the animals far away from the working area.
Always remind that this machine can cause very serious incidents.
Do not work under the rain and/or in places wet and/or slipping.
Do not expose to the rain.
Do not use the tool during bad weather conditions and where a risk of lighting is possible.
Use complete personal protective equipment during the use of the tool: gloves, antiskid
footwear, helmet, eyes protection, protection clothes, and mask of protection.
Do not use the machine when you are tired, under the influence of alcohol or drugs or
sick.
The machinery must not be used in a way where experience has shown that danger
8
Advertisement
