Advertisement
When the chain is moving, it must not touch objects, materials or persons.
-
-
Start cutting only with a chain at full speed.
-
Do not attempt to insert the saw into a pre-existing notch. Always make a new notch.
Pay attention to moving branches or other forces that could close a notch and pinch or
-
hinder the chain.
-
Do not attempt to cut a branch with a diameter greater than the cutting length of the chain
saw.
-
Always switch off the tool, let the chain completely stop before making any adjustments,
maintenance, cleaning or repairs.
-
When transport and storage, always stop the tool first and put the protection on the tool.
-
The chain must remain sharp and taut. Regularly check the tension of the chain.
Only use replacement parts and original accessories.
-
Use only the manufacturers specified replacement guides and chains. Incorrect
-
replacement guides and chains may cause chain breakage and / or rebound.
Check that there are no obstacles or electrical wires hidden in the work area.
-
Check the general condition of the appliance before each use. Do not use a device with a
-
damaged battery or other parts. Do not touch a damaged cable. In case of any damage,
have the appliance repaired by an authorized repairer.
-
Immediately stop the device if an abnormal level of vibration has been detected. In case
of damage to the blade, it is necessary to change the complete set of blades.
-
Use the device only if all protective devices are mounted. Do not use the device with
faulty protective equipment. Do not modify the unit.
-
Keep the cable away from the work area.
Do not work with the tool when it rains, in bad weather or in a damp environment. Do not
-
use the machine when there is a risk of thunderstorms and storms.
Only work outdoors, under daylight or under artificial lighting.
-
Always carry the appliance by its handle
-
Tie long hair in a way to prevent them from coming into contact with the blades. Do not
-
wear jewelry and loose clothing when operating the machine.
The appliance should never be used near people, especially children and pets. Stop the
-
operation immediately if this condition is not met. In all cases, ensure a safe area of
at least 15 meters around the work area.
The operator is responsible for accidents caused to others.
-
Always take a stable working position. Make sure you step on the slopes. Take extreme
-
caution when working on slopes.
Do not use the tool when you are tired, sick or under the influence of alcohol or drugs.
-
Take regular breaks to reduce the risk of fatigue.
-
Never leave the machine unattended. Switch off and remove the battery and put it out of
-
the reach of people if you are away from work.
Remove the battery when transporting it. Put the guard on the blade when it is being
-
transported.
This device is not intended for use by persons (including children) whose physical,
-
sensory or mental capacities are reduced, or by persons without experience or
knowledge, unless they have been able to benefit, By means of a person responsible for
their safety, supervision or prior instructions concerning the use of the appliance. Children
should be supervised to ensure that they do not play with the appliance
-
Always keep this manual at hand.
-
The device must always be used fully assembled and secured.
-
Store the tool with its blade guard and out of the reach of children
Never use an incomplete or unauthorized tool.
-
Local laws may restrict the use of this tool.
-
Check the tool regularly and before each use to observe any impact or damage.
-
Always use the tool with the supplied harness.
-
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of injury
and damage remain. The following hazards may arise in the structure and design of this product:
-
emission of vibrations if the product is used for long periods of time or not properly managed and
properly maintained.
There are harmful health consequences resulting from the
10
Advertisement
