Safety Instructions - digicon d'Flow Product Manual

4.

Safety Instructions

This manual has several safety messages: try to read and follow them in order to
promote your safety and that of third parties.
Applicable symbols:
Ÿ
It indicates important instructions concerning operation or maintenance.
It indicates a powered terminal where dangerous voltage may be present.
It indicates a protective ground wire.
Terminology:
Ÿ
The terms defined below are used in this document. The definitions are based on those
found in safety regulations in order to direct tasks for a certain target audience.
Technical professiona: l the term applies to trained or qualified people who have
permission to install or replace technical equipment or to offer technical support. It is
recommended that the technical professional use his experience and technical abilities
to avoid possible injuries regarding himself and others due to the risks in areas of
restricted access.
User and operato : rthe terms user and operator apply to people who are not
technical professionals.
Informative
Ÿ
WARNING
- Electrical shock can cause serious personal injuries and even death;
thus, avoid direct contact with dangerous voltages while handling the
equipment.
- Ground wiring is essential for safe operation: make sure the power
network meets this requirement safely.
- Only qualified technical professionals are allowed to install and
perform maintenance in the equipment.
- Before any maintenance, switch the circuit breaker off to stop
the power into the equipment.
7