Advertisement
Detergent left in
dispenser
The dishes aren't
drying
The dishes aren't
drying
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes
E1
Longer inlet time
Not reaching required
E3
temperature
E4
Overflow
WARNING:
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
• If there is an error code that cannot be solved, contact help.Kogan.com for support.
38
Dishes block detergent
dispenser
Improper loading
Too little rinse-aid
Dishes are removed too
soon
Wrong program has
been selected
Use of cutlery with a
low-quality coating
Meanings
Re-loading the dishes properly.
Load the dishwasher as suggested in
the directions.
Increase the amount of rinse-aid/refill
the rinse-aid dispenser.
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
come out. Take out the dishes until the
inside temperature is safe to touch.
Unload the lower basket first to prevent
the dropping water from the upper
basket.
With a short program, the washing
temperature is lower, decreasing
cleaning performance. Choose a
program with a long washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in the
dishwasher.
Possible Causes
Faucets is not opened or water intake is
restricted or water pressure is too low.
Malfunction of heating element
Some element of dishwasher leaks
Advertisement
