Advertisement
3. Replace the cap by inserting it aligned with "open" arrow and turning it to the closed
(right) arrow.
Note:
Clean up any spilled rinse aid with a cloth to avoid excessive foaming during the next
wash.
Adjusting the Rinse Aid Reservoir
Dial
The rinse aid reservoir has six settings. Both the
recommended setting and the factory setting is "4". If the
dishes are not drying properly or are spotted, adjust the dial
to the next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or
a bluish film on glassware or knife blades.
27
Advertisement
